Skip to main navigation.

Electrical Safety Tips to Remember for Your Home

To support your electrical safety activities, a checklist of basic safety essentials helps keep your home safe from electrical fire and shock hazards:

  • Check outlets for loose-fitting plugs. Replace missing or broken wall plates so wiring and components are not exposed. If you have young children at home, install tamper resistant outlets or cover unused outlets with plastic safety caps.

  • Never force plugs into outlets. Do not remove the grounding pin (third prong) to make a three-prong plug fit a two-prong outlet. Avoid overloading outlets with adapters and too many appliance plugs.

  • Make sure cords are not frayed or cracked, placed under carpets or rugs, or located in high traffic areas. Do not nail or staple them to walls, floors, or other objects.

  • Use extension cords only on a temporary basis—not as permanent household wiring. Make sure they have safety closures to protect children from shock and mouth burns.

  • Make sure outlets in the kitchen, bathrooms, laundry, basement, garage, outdoors, or any area with water are equipped with Ground Fault Circuit Interrupters.

  • Make sure fuses are properly sized for the circuit they are protecting. If you do not know the correct rating, have an electrician identify and label the correct size to be used.

  • If an appliance repeatedly blows a fuse, trips a circuit breaker, or has given you an electrical shock, immediately unplug it and have it repaired or replaced.

  • Check periodically for loose wall receptacles, wires, or loose lighting fixtures. Listen for popping or sizzling sounds behind walls. Immediately shut off, then professionally replace light switches that are hot to the touch as well as lights that spark or flicker.

For more information on electrical safety for the home, please contact anyone at our office at 1-800-696-6552. 

 

July 2016

 

Powered by Touchstone Energy Cooperatives Logo